[PIPE2D-998] Create plots of high signal-to-noise spectra of calib lamps Created: 07/Mar/22 Updated: 09/Mar/22 Resolved: 09/Mar/22 |
|
| Status: | Done |
| Project: | DRP 2-D Pipeline |
| Component/s: | None |
| Affects Version/s: | None |
| Fix Version/s: | None |
| Type: | Task | Priority: | Normal |
| Reporter: | ncaplar | Assignee: | ncaplar |
| Resolution: | Done | Votes: | 0 |
| Labels: | None | ||
| Remaining Estimate: | Not Specified | ||
| Time Spent: | Not Specified | ||
| Original Estimate: | Not Specified | ||
| Attachments: |
first_draft_lamps_plot.png
PFI_lamps_plot.png
|
||||||||
| Issue Links: |
|
||||||||
| Story Points: | 1 | ||||||||
| Description |
|
Jeg is making an report to IPMU, and requests: ``Could you make me a page-sized plot with 6x2 plots for the calibration lamps, from your csv files, say 6 blue plots on the left and 6 red plots on the right, each covering the wavelength range of that channel. and running over the lamps vertically, say continuum b,r at the top, then Hg/CD b,r, then Ne b,r then Ar b,r, then Kr b,r, then Xe b,r on the bottom? The vertical scales on each should cover the range of counts This should me a minimal amount of work, but it might need to back and forth with JEG to ensure that the final plot is exactly how we wants it. |
| Comments |
| Comment by ncaplar [ 08/Mar/22 ] |
|
First version at |
