[INSTRM-807] Provision networked serial ports for roughing system Created: 31/Oct/19 Updated: 22/Nov/19 Resolved: 22/Nov/19 |
|
| Status: | Won't Fix |
| Project: | Instrument control development |
| Component/s: | None |
| Affects Version/s: | None |
| Fix Version/s: | None |
| Type: | Task | Priority: | Normal |
| Reporter: | cloomis | Assignee: | Yoshida, Hiroshige |
| Resolution: | Won't Fix | Votes: | 0 |
| Labels: | SPS, Subaru, subaru-personnel | ||
| Remaining Estimate: | Not Specified | ||
| Time Spent: | Not Specified | ||
| Original Estimate: | Not Specified | ||
| Issue Links: |
|
||||||||
| Story Points: | 2 | ||||||||
| Sprint: | SM1PD-2019 A, SM1PD-2019 B | ||||||||
| Description |
|
PFS will have two independent roughing stations, each controlled by an instance of ics_roughActor. From the software point of view, each station consists of a roughing pump and a vacuum gauge, and needs access to them. Specifically, for each station we need two terminal server ports:
Both should be configured as raw TCP connections (no telnet, no Realcom, etc). The terminal server must be on the PFS network. The actors will need the hostname and port numbers. This is required for SM1. |
| Comments |
| Comment by hassan [ 14/Nov/19 ] |
|
Keep this ticket open till Julian confirmed installation of MOXA on the 5th rack. |
| Comment by hassan [ 22/Nov/19 ] |
|
cloomis: a new MOXA will take care of this. |
| Comment by hassan [ 22/Nov/19 ] |
|
Replacement ticket based on MOXA has been provided by Craig ( |