[INSTRM-52] [xcuActor] Split out roughing pump and ion gauge into new roughingActor Created: 27/Dec/16 Updated: 25/May/18 Resolved: 25/May/18 |
|
| Status: | Won't Fix |
| Project: | Instrument control development |
| Component/s: | None |
| Affects Version/s: | None |
| Fix Version/s: | None |
| Type: | Task | Priority: | Major |
| Reporter: | cloomis | Assignee: | shimono |
| Resolution: | Won't Fix | Votes: | 0 |
| Labels: | None | ||
| Remaining Estimate: | Not Specified | ||
| Time Spent: | Not Specified | ||
| Original Estimate: | Not Specified | ||
| Issue Links: |
|
||||||||
| Description |
|
This issue was initially filed into JIRA by 'cloomis' at 01/Oct/15 3:40 PM as ICS-14. The xcuActor currently controls a roughing pump and queries an ion gauge on the manifold between that pump and the turbo. We will have two of these "roughing stations", backing up twelve xcuActors, and the roughing devices will be turned off most of the time. It makes sense to pull the control out of the xcuActor. As long as we are only controlling one dewar (i.e. 2015Q3 work at JHU and LAM), this is not important. |
| Comments |
| Comment by arnaud.lefur [ 18/May/17 ] |
We have two dewars now connected to one roughing station, cloomis should that be considered important now ? |
| Comment by cloomis [ 19/May/17 ] |
|
Do you have Pfeiffers on the roughing side? |
| Comment by arnaud.lefur [ 20/May/17 ] |
|
We have one Pfeiffer gauge on the roughing which is read by xcu_r1 . |
| Comment by cloomis [ 25/May/18 ] |
|
Covered by |