[INSTRM-2010] Allocate one DCB PDU port to light source for Cable B Created: 06/Jul/23 Updated: 19/Jul/23 Resolved: 19/Jul/23 |
|
| Status: | Done |
| Project: | Instrument control development |
| Component/s: | None |
| Affects Version/s: | None |
| Fix Version/s: | None |
| Type: | Task | Priority: | Normal |
| Reporter: | yuki.moritani | Assignee: | arnaud.lefur |
| Resolution: | Done | Votes: | 0 |
| Labels: | EngRun | ||
| Remaining Estimate: | Not Specified | ||
| Time Spent: | Not Specified | ||
| Original Estimate: | Not Specified | ||
| Sprint: | Eng12July |
| Description |
|
Since all the cable B have been installed, we will illuminate Cobra from Gang connector in SCR. To turn on and off the light, we will use an empty port of PDU which is used for DCB. (Since PDU is on PFS-LAN, control will be easier hopefully.) |
| Comments |
| Comment by arnaud.lefur [ 06/Jul/23 ] |
|
Just a side question, are we talking about the illuminator that replace the bia for the missing spectrograph modules ? |
| Comment by yuki.moritani [ 06/Jul/23 ] |
|
Yes, this is the illuminator to use as bia for missing spectrograph modules. It is OK just to turn on/off first, but if we have a time, we could have better/clever way. |
| Comment by yuki.moritani [ 15/Jul/23 ] |
|
arnaud.lefur , fmadec We'd like to use port 8. |
| Comment by arnaud.lefur [ 19/Jul/23 ] |
|
merged as dcbActor:1.2.4 |