[#INSTRM-153] Check FEE powerup state

The FEE should come up in idle more, with idle voltages. That is done by the feeControl instantiation/initialization, which enables the clocks and sets the mode. Not clear that is happening now:

pfs@PFS-WS2:~/mhs/logs/actors/ccd$ oneCmd.py ccd_r1 --level=d connect controller=fee
2017-07-13T15:44:04.205 ccd_r1 : controllers=ccd,fee
pfs@PFS-WS2:~/mhs/logs/actors/ccd$ oneCmd.py ccd_r1 --level=d fee status
2017-07-13T15:44:15.044 ccd_r1 i temps_ccd0="173.87"
2017-07-13T15:44:15.045 ccd_r1 i temps_ccd1="172.72"
2017-07-13T15:44:15.045 ccd_r1 i temps_fee="291.33"
2017-07-13T15:44:15.046 ccd_r1 i temps_pa="247.59"
2017-07-13T15:44:15.047 ccd_r1 i bias_ch0_p_on="0.0"
2017-07-13T15:44:15.048 ccd_r1 i bias_ch0_p_off="0.0"
2017-07-13T15:44:15.048 ccd_r1 i bias_ch0_dg_on="0.0"
2017-07-13T15:44:15.048 ccd_r1 i bias_ch0_dg_off="0.0"
2017-07-13T15:44:15.048 ccd_r1 i bias_ch0_s_on="0.0"
2017-07-13T15:44:15.049 ccd_r1 i bias_ch0_s_off="0.0"
2017-07-13T15:44:15.049 ccd_r1 i bias_ch0_sw_on="0.0"
2017-07-13T15:44:15.049 ccd_r1 i bias_ch0_sw_off="0.0"
2017-07-13T15:44:15.049 ccd_r1 i bias_ch0_rg_on="0.0"
2017-07-13T15:44:15.050 ccd_r1 i bias_ch0_rg_off="0.0"
2017-07-13T15:44:15.060 ccd_r1 i bias_ch0_og="0.0"
2017-07-13T15:44:15.061 ccd_r1 i bias_ch0_rd="-0.68"
2017-07-13T15:44:15.061 ccd_r1 i bias_ch0_od="-0.69"
2017-07-13T15:44:15.061 ccd_r1 i bias_ch0_bb="0.0"
2017-07-13T15:44:15.062 ccd_r1 i bias_ch1_p_on="0.0"
2017-07-13T15:44:15.062 ccd_r1 i bias_ch1_p_off="0.0"
2017-07-13T15:44:15.062 ccd_r1 i bias_ch1_dg_on="0.0"
2017-07-13T15:44:15.062 ccd_r1 i bias_ch1_dg_off="0.0"
2017-07-13T15:44:15.063 ccd_r1 i bias_ch1_s_on="0.0"
2017-07-13T15:44:15.063 ccd_r1 i bias_ch1_s_off="0.0"
2017-07-13T15:44:15.080 ccd_r1 i bias_ch1_sw_on="0.0"
2017-07-13T15:44:15.080 ccd_r1 i bias_ch1_sw_off="0.0"
2017-07-13T15:44:15.080 ccd_r1 i bias_ch1_rg_on="0.0"
2017-07-13T15:44:15.081 ccd_r1 i bias_ch1_rg_off="0.0"
2017-07-13T15:44:15.081 ccd_r1 i bias_ch1_og="0.0"
2017-07-13T15:44:15.081 ccd_r1 i bias_ch1_rd="-0.68"
2017-07-13T15:44:15.081 ccd_r1 i bias_ch1_od="-0.69"
2017-07-13T15:44:15.082 ccd_r1 i bias_ch1_bb="0.0"

[INSTRM-153] Check FEE powerup state Created: 14/Jul/17 Updated: 18/Mar/23 Resolved: 18/Mar/23
Status:	Done
Project:	Instrument control development
Component/s:	ics_xcu_fpga
Affects Version/s:	None
Fix Version/s:	None

[INSTRM-153] Check FEE powerup state Created: 14/Jul/17 Updated: 18/Mar/23 Resolved: 18/Mar/23