[INSTRM-1282] Possible command timeouts from FEE Created: 21/May/21 Updated: 07/Jun/21 Resolved: 07/Jun/21 |
|
| Status: | Won't Fix |
| Project: | Instrument control development |
| Component/s: | ics_xcu_fee, ics_xcu_fpga |
| Affects Version/s: | None |
| Fix Version/s: | None |
| Type: | Task | Priority: | Normal |
| Reporter: | cloomis | Assignee: | cloomis |
| Resolution: | Won't Fix | Votes: | 0 |
| Labels: | SPS | ||
| Remaining Estimate: | Not Specified | ||
| Time Spent: | Not Specified | ||
| Original Estimate: | Not Specified | ||
| Issue Links: |
|
||||||||||||||||||||
| Sprint: | SM1PD-2021 A10 | ||||||||||||||||||||
| Description |
|
The ccd actor sometimes fails to get a response from a FEE command. Cannot tell which side is the problem. Almost always the same command. Cannot trivially distinguish between cases where the FEE/link misbehaved and when it might have been disconnected or otherwise worked on, so the logs at LAM and (especially) JHU are hard to make use of. At Subaru, looks like ~4 real instances for r1 and ~4 for b1 since 2020-01-01. Here is an example of one good, one failed command from this morning. Both the most command command to fail on (by far): a mode change, which switches voltages levels for all the clocks and bias voltages. Usually takes ~0.1s, so 2s is awry. 2021-05-21 03:55:50.684Z root 10 feeControl.py:904 sending command :'~lp,idle\n': 2021-05-21 03:55:50.688Z root 10 feeControl.py:962 received :~lp,idle: 2021-05-21 03:55:50.745Z root 10 feeControl.py:962 received :SUCCESS: 2021-05-21 03:56:03.487Z cmds 20 Actor.py:507 new cmd: wipe 2021-05-21 03:56:03.488Z root 10 feeControl.py:904 sending command :'~lp,idle\n': 2021-05-21 03:56:03.492Z root 10 feeControl.py:962 received :~lp,idle: 2021-05-21 03:56:05.494Z root 30 feeControl.py:953 pyserial device read(1) timed out 2021-05-21 03:56:05.495Z root 10 feeControl.py:962 received :: |
| Comments |
| Comment by cloomis [ 07/Jun/21 ] |
|
Closing this; leaving |